SanDiegoMark posted:George,
(Always work with a copy of the sound file, then if we break it, you can download the original).
Observations: 1. clips at 248-251 have the 0x93 Data and they play correctly.
2. clips at 10-11 are also 24 bit (Data 0x8F) and they play correctly.
3. by looking at the starting address, the clip at 178 also appears at 80 but with a correct Data of 0x1B. Clip 80 is where I usually see the PFA announcements. If you look at clips 80-96, you again see the same clips as 248-251 but with the correct Data of 0x1B. "Same Clips" means the two index locations are referencing the same sound in the sound file.
So I think its an error in the sound file. You can click on each clip 178-183 and press [Edit Index], click in the Data edit field, then use the arrow keys to select the correct Data byte value of 0x1B. Download the new sound file into the engine and it should work for both PFA (from clips 80-96) and S01-S10 (from clips 177-186).
This pointed out an incorrect error message when the Data byte is edited. Just press [OK] on the message box. I'll repair the error in the next release.
Mark
Mark,
Thank you! I made the changes to a copy of the file. Later today I will set up my TIU and test track to load the file onto my engine and test the changes out. I will report back.
Best,
George
