Skip to main content

Reply to "Please help review my DCS TIU track plan (attached)"

I’m not John, but…You don’t NEED a watchdog generator.  There are a few other ways to operate switched sidings with DCS.

  1. Switch the siding on before you power up the TIU.
  2. If you switch the siding on after the TIU has been powered up, the loco will generally start up in conventional (with smoke on). You then have to select the engine and push the START UP button on the TIU to make it run in DCS mode.  You may also need to push the SMOKE button to turn the smoke off.

OGR Publishing, Inc., 1310 Eastside Centre Ct, Suite 6, Mountain Home, AR 72653
800-980-OGRR (6477)
www.ogaugerr.com

×
×
×
×
×