Skip to main content

Reply to "Please help with an issue adding a 135w powerhouse to track."

FlyPlanes-PlayTrains posted:
 Does the powerhouse need to be phased with the KW & the 1033?

Yes.

PM-1 "U" to 1033 "A".  This is not a typo... "A" is common on the 1033.  "C" will power your switches at 16 volts. If the 1033 is powering switches & accessories only, no trains or track, it really doesn't make a lot of difference, but the whistle & direction controls are all on the "U" post, and you don't want that stuff common with the whole layout.

E-UNIT-79 posted:

Have you tried to just add the base leaving the kw in place with no powerhouse?just add the base to the mix with 1 wire

 I have powered the PM-1 very satisfactorily with the D-U posts, no PH-1 needed.

Last edited by ADCX Rob

OGR Publishing, Inc., 1310 Eastside Centre Ct, Suite 6, Mountain Home, AR 72653
800-980-OGRR (6477)
www.ogaugerr.com

×
×
×
×
×