Skip to main content

Reply to "Post war ZW transformer circuit breaker pops after 5 - 10 minutes of running 3 trains simultaneously; what's up?"

carsntrains posted:

The downside to the CW-80s adjustment is you have to adjust it every time you unplug the transformer.

That's incorrect, the accessory voltage should be retained until you change it.  It comes from the factory at 12V, and stays that way until you change it.

Just to make sure, I set mine to 6V and powered off the CW-80 for around 5 minutes.  When I turned it back on, the accessory output was still 6 volts.

OGR Publishing, Inc., 1310 Eastside Centre Ct, Suite 6, Mountain Home, AR 72653
800-980-OGRR (6477)
www.ogaugerr.com

×
×
×
×
×