Skip to main content

Reply to "Power Strip Usage"

Pin 5 on the 9 pin connector on both Legacy and TMCC bases is the same half of the signal that is put on the earth ground.  So in essence if you tap off pin 5 and run it near the trouble spot it's the same as using the earth ground.  If your strip is the issue, using pin 5 bypasses the strip. 

OGR Publishing, Inc., 1310 Eastside Centre Ct, Suite 6, Mountain Home, AR 72653
800-980-OGRR (6477)
www.ogaugerr.com

×
×
×
×
×