Skip to main content

Reply to "Power Strip Usage"

ironman1 posted:

Or is the ultimate solution the TMCC buffer to avoid all this jerking around?

The TMCC booster could be warranted but connecting the ground wires to pin #5 is advisable in any case.

Just solder a wire to pin#5 and leave the other pins alone. Then connect all your ground wires to that wire and place them in problem areas.

Last edited by cjack

OGR Publishing, Inc., 1310 Eastside Centre Ct, Suite 6, Mountain Home, AR 72653
800-980-OGRR (6477)
www.ogaugerr.com

×
×
×
×
×