Skip to main content

Reply to "Power supply for a Lionel SC-1"


Take the 4 Phillips screws out of the back, open it up and solder in two wires. Red is the A (hot) and black is the U (ground). Now you can power them with any transformer! I trim a little plastic away to get the wires past the original plug.  All of mine are powered this way. I use a 1033 transformer with around 12 volts.



Images (3)
  • 699DFC3A-A4BB-4721-8878-44EDAA3CFD8E
  • EB14CDD1-4E7C-4A70-90A6-891C0C0397E0
  • BF2B5B62-A077-4BB2-A626-CE0A422D52B0
OGR Publishing, Inc., 1310 Eastside Centre Ct, Suite 6, Mountain Home, AR 72653