Skip to main content

Reply to "Problem Solved / Red & Green LEDs don't stay lit on Ross double crossover"

After some reflection, I'm pretty sure I know what I did to my relay.  I mislabeled the leads from the switch machine to the DZ 1008.  This caused some confusion, which led me to make an unneccessary connection which led to an immediate short when I turned on power to the layout.  I fixed my reversed connections to the DZ 1008 and the switch works ok, but not the LED at the one switch machine.  I believe I fried the common feed in the relay to the switch machine.  If you did something similar, this may be your problem.  These relays don't take kindly to shorts.   I'm going to get two more and fix it.  I like everything to work as designed and I'm holding one in reserve.  Good Luck with yours.  Sometimes you've just got to fess up.

OGR Publishing, Inc., 1310 Eastside Centre Ct, Suite 6, Mountain Home, AR 72653
800-980-OGRR (6477)
www.ogaugerr.com

×
×
×
×
×