Skip to main content

Reply to "Problem with new/unused 164 log loader"

If it was mine I would gently bend the two tabs up at the end of the motor and pull the end plate off with the brushes. Then I would clean and polish the commutator and gently clean the ends of the carbon brushes and put back together again and see if it runs, you have nothing to lose as it isn’t running anyway.

OGR Publishing, Inc., 1310 Eastside Centre Ct, Suite 6, Mountain Home, AR 72653
800-980-OGRR (6477)
www.ogaugerr.com

×
×
×
×
×