Skip to main content

Reply to "Problems with MTH consolidation PS3"

Gregg,

 

In 2 rail mode, the brown and black wires are used.  One goes to left one goes to right.  The red(center rail) is not used.  

In 3 rail mode, the brown and black are tied together (outside rails) and the red wire (center rail ) is used.

The problem is in the fact that not ALL axle sets are used.  Some remain isolated even when in 3 rail mode.  The front pilot is one.  Usually only one truck is switched in the tender.  The other is left isolated.  This sometimes creates issues with non derailing features.  In some cases it also causes performance issues due to lack of ground.

Dave

 

 

 

OGR Publishing, Inc., 1310 Eastside Centre Ct, Suite 6, Mountain Home, AR 72653
800-980-OGRR (6477)
www.ogaugerr.com

×
×
×
×
×