Gregg posted:You should be able to get both running even if Conventional is your only option.
Lets address #2 first... I know you replaced the batteries on this one with a BCR however .. how long do the sounds continue on after track power is turned completely off. Should be approx. 6 or 7 seconds.
THe SW Try turning the vol pot up and down a few times. . Yes a dcs remote might help however keep trying with the conventional reset b/w combination.
Gregg, as I thought, the sound for the Doodlebug cuts off instantaneously when I shut down the power. In addition, when the "direction" button is depressed, that also kills the sound, and it begins again with the engine start-up sounds -- just as if I had turned the power off, then turned it on again.
As for the SW-1, twiddled the volume screw up and down several more times, and repeated the reset to defaults sequence -- still no sound.