Skip to main content

Reply to "Protection against voltage spikes"

TedW posted:

The TVS diodes used in this application are bi-directional(no band).  Here’s a couple of pics of acceptable diodes and install locations.  At the track connections is also a good location.  Hook up straight across the hot and common terminals.

B71BC81E-1BA2-4568-A0A7-D74965AFD51E7199DEC8-36CF-4855-9AE2-A7C799BDB97A

Ted and others,

I noticed in Ted's picture above - the Mouser P/N differs slightly from the diode referenced in the article Cam posted, above...in Ted's pictured is Mouser P/N: 576-1.5KE36CA, where the one referenced in the article that Cam posted is P/N: 576-1.5KE33CA

For a non-electrical engineers like myself, is one preferred over another?

Thanks.

Paul

 

OGR Publishing, Inc., 1310 Eastside Centre Ct, Suite 6, Mountain Home, AR 72653
800-980-OGRR (6477)
www.ogaugerr.com

×
×
×
×
×