Skip to main content

Reply to "Proto 2 Loco Goes Crazy"

I had similar symptoms with a 0-8-0 switcher. It could be the tether or the tach reader. If it seems to show up more in corners where’s there’s a little strain on the tether.  More likely the pins that tether plugs into need to be resoldered on the PC board. They basically just need a pencil type iron touched to each connection to re flow the solder on the connection. If you aren’t comfortable soldering. Send it to a pro. This job isn’t for the faint of heart as your dealing with close spacing and small wires. It’s best to leave the tether plugged in when doing this so the pins stay in proper alignment.

Last edited by Dave_C

OGR Publishing, Inc., 1310 Eastside Centre Ct, Suite 6, Mountain Home, AR 72653
800-980-OGRR (6477)
www.ogaugerr.com

×
×
×
×
×