Thanks Gunnrunner
I take it from the photo it's the wire piece with the abacus looking green bead with the black lines I am actually bending and tucking into the slots where the jumper used to be?
I tested one of my switches tonight, one that wasn't working. The LED worked fine, but the remote is defective. I took the bottom off and hooked the two wires I was using to the aux side under the IN and Ground slots, but even that didn't help. I thought maybe my gator clips, since they weren't connected to both the straight and the thru sides might be a factor, but when I connected the wires internally, the motor still only moved one way with help from the remote, I had to move it back the other way manually with the lamp. Based on this, only one of the toggle buttons, the rear one near the green light on the remote, not the front one near the L, is only working. Does my math compute?
