Skip to main content

Reply to "Protosound 3 Steam Upgrade Kits arriving in March!"

@Mikado posted:

As an aside, We are working to create an addendum that illustrates the minor wiring changes required to use a Protosound 3/2 Stacker in a 4 motor application (such as a lead powered A with a PS2 board and trailing powered A with a PS2 slave board). (This addendum will also apply to any tubine with 4 motors.

What I’m saying is that if the factory installed PS2 5V or 3V board in the lead unit goes out, you can use the stacker to replace it AND keep the PS2 Slave board (no need to spend 2x the money to repair a n AA or ABA set with a bad lead powered A board.

We’ll hopefully have this completed around the time the boards begin shipping in March.

Thank you,

Mike

MTH Parts & Sales LLC

Mike to be clearer?  Is this a PS-32 running four motors alone?  Was always told this was a no no for PS-2 and 3.  Or just the mod to use the 2 pin connector on stacker to drive the slave board motor input?  G

OGR Publishing, Inc., 1310 Eastside Centre Ct, Suite 6, Mountain Home, AR 72653
800-980-OGRR (6477)
www.ogaugerr.com

×
×
×
×
×