Updated 3/19/2024:
- Spent some time under the layout cleaning up labeling. Below is an example of a bus label for Power District #6 (Weirton Junction). It is color-coded (using zip-ties) white. The bus uses 12 awg red and black wire to carry 18VAC.
- I also cleaned up some of the power distribution panel to reflect some changes in direction. I left the Command Base and the 3 DZ-2001s (although only the 3rd is being used - see the white signal wire?) in place. The terminal block above the DZ-2001s holds the Signal Bus 1 (at the left), Signal Bus 2 (in the middle), and Switch Bus 3 (at the far right). Signal Buses 1 & 2 will light all DZ-1060 PRR position light signals, the DZ-1010 and DZ-1020 highway crossing devices, and the MTH 30-11030 PRR signal bridges. These are everywhere except the Staging Area.
More when I know it.
George