Updated 6/03/2018:
After church I managed to assemble most of the 2' x 8' table nearest the aisle (surface #4 on the diagram). I still have a cross member to add and a vertical upright for the divider. After that, I will install the divider and most of the Staging Area will get its plywood subroadbed.
Here are some photos. This first one shows the table on its back with the legs being attached.
I clamped the new table to the others in the Staging Area. This table's legs differ in several ways from the others.
- They are outside legs and will be more visible than the others.
- Because they are more visible, I used poplar so as to improve their looks. I also stained them a slightly darker color than the others (not sure it shows up).
- Because of imperfections in the floor, these legs are 1/4" shorter than the others. I am also using a slightly wider leveling glide.
Here's a closer view of the table. A cross member will be installed to support the final vertical backdrop column. The vertical 2x2 will go at the extreme right hand side of the table.
OK, more when I know it.
George