Skip to main content

Reply to "PS 2.0 8.4 VOLT PRIME MOVER SOUNDS DISTORTED BUT NOT CAB CHATTER, HORN OR BELL?"

Gregg posted:

 

I'm  guessing speaker is on it's way out...

.. You could try  turning the vol pot by hand,

Feature reset... Menu/Advanced/ reset engine/ Feature reset.

easy battery test..... How long do the sounds continue on after track power is shut down  (turned  completely off?)

The volume pot is all the way up and only the prime mover has issues with distortion at any volume, I did the whistle and 5 bells command from my Z-4000 and it signaled two horn blasts as successfully completed.  The engine sounds stay on for about ten seconds after track power is shut off and the battery meters out at 9.65 volts.  If the speaker is on its way out why do the other sounds, like cab chatter, horn, bell, and compressor sound fine?  BTW, I am running conventional and do not have the DCS system.

Last edited by Chas

OGR Publishing, Inc., 1310 Eastside Centre Ct, Suite 6, Mountain Home, AR 72653
800-980-OGRR (6477)
www.ogaugerr.com

×
×
×
×
×