Skip to main content

Reply to "PS2 3V, speed control off in conventional, shuts itself off"

Alan Mancus posted:

hi why don't you contact GGG he can repair your boards sometimes or just send him the whole engine!

Alan

I agree with this. The problem would be if there's some other type of overload or short causing the boards to shut down. Replacing just the boards without full testing might not solve it. The best thing would be to have G (or a MTH tech) test the board set for the processor shut down issue. It might be where just the processor board needs changing or maybe not?

 I have seen where a board will stop an engine when the tape stripes are way off what the board expects them to be. I have seen where bad tethers on the steamers cause it to shut down. I just had one where the smoke fet shorted causing the boards to shut down. So there are other reasons.

Last edited by Engineer-Joe

OGR Publishing, Inc., 1310 Eastside Centre Ct, Suite 6, Mountain Home, AR 72653
800-980-OGRR (6477)
www.ogaugerr.com

×
×
×
×
×