Skip to main content

Reply to "PS2 Board Swap Question"

Scott the board you put in now is a ps2 3 volt board not a ps 2 5 volt board as you stated, and no need to worry the ps2 3 volt boards were much better then the ps 2 5 volt boards.ps 2 3 volt boards hardly ever have a failure, you only need to make sure your battery is charged before using unless you installed a BCR 2.4 volt super capacitor!

Good luck and enjoy your train now.

Alan

P.S. if you installed a BCR only has to charge for 45 seconds to a minute then run as usual 

OGR Publishing, Inc., 1310 Eastside Centre Ct, Suite 6, Mountain Home, AR 72653
800-980-OGRR (6477)
www.ogaugerr.com

×
×
×
×
×