Skip to main content

Reply to "PS2 Boards Challenge (RESOLVED!)"

Any speaker will work, but 5V boards need 16ohm and 3V and PS-3 use 4 ohm.  Normally 50mm dia and 17mm height.  But depending on engine smaller dia also and you need to make sure of height and magnet size as some speakers come through a small dia hole in the frame.  So you need to take the measurements, of Dia and Height and make sure it will fit for the specific engine.  G

OGR Publishing, Inc., 1310 Eastside Centre Ct, Suite 6, Mountain Home, AR 72653
800-980-OGRR (6477)
www.ogaugerr.com

×
×
×
×
×