Skip to main content

Reply to "PS3 E44 Arc and Fail"

I agree with GGG I'll bet you your board is now dead and you'll need another board, the problem is if you don't find what caused the short YOUR ASKING TO BLOW ANOTHER BOARD. you need to inspect thoroughly and if need be trouble shoot with a  ohm meter while moving  wires round no voltage applied just use ohm meter and see if you can get the short to show up  if nothing is obvious I would look on the frame area described for a arc deposit that was left. anytime there is a short where ac hits the dc on these boards there usually toast!

Alan

OGR Publishing, Inc., 1310 Eastside Centre Ct, Suite 6, Mountain Home, AR 72653
800-980-OGRR (6477)
www.ogaugerr.com

×
×
×
×
×