OK, I got all the hardware installed on the PS3 upgrade with the diesel kit. This is not a PS3/2 kit. Everything was replaced, lights, couplers, board, tach reader, etc. On initial startup the P5a runs forward and reverse ok. I am using a Z750 with a controller to do the initial test as in the manual.
The marker lights go off when the engine is in forward, both the green and red. In reverse all 4 of the marker lights are lit. The reverse light and headlight work ok as do the interior lights. I added the resistor to the red wire of the red marker lights, as stated in the addendum sheet.
I get no 'test' sound when trying the horn or the bell. Is this because it is a PS3 upgrade and needs the sound file loaded?
Also there is no PS3 sound file shown on the P5a page. Can I just use the GG! PS3 sound files?
Also any great ideas on what to do with all the wires? Wow! Zip ties to the rescue I hope. I did not shorten any of the kit wires, I figured it would be easier to wrap them up then cut and resolder. I also removed all the unnecessary wires from the 40 pin plug.
thanks for any help. I think MTH needs to update their instruction manual for the PS3 kits.