@VonFrank posted:When initially powered up, the variable channels will default to 0 volts, regardless of what they were left on when previously powered down. When changing the voltage after power up, a PS2 or PS3 engine sitting on those variable lines sometimes turns on by itself. I haven't been able to narrow down the cause any more than that. At least for me.
Actually, you can set the variable channels in fixed mode and they come up full voltage. Also, that's a good operating mode as to run in variable mode, all you have to do is select the track and vary the voltage, the channel switches to variable mode. When it does the switch, again it outputs the watchdog signal.
