Skip to main content

Reply to "PS3 upgrade information."

I mentioned I would post some pictures of the PS-32 installs as replacements for PS-2 5V boards in the engine.  Here are a few.  So far I have installed this in a bantam Turbine engine, 4-6-0 RTR Tender, and now a Dreyfus and Unshrouded J in the engine.  The fits are tighter and you need to be creative with board mounting. For the J the heat sink could mount directly to a chassis screw, so I reversed the metal mount board and used it for support of the front of the board only.


You really need to do a lot of fitting an locating to ensure the shell can go back on and that wires, which sit much higher up then the PS-2 boards have clearance and nothing that can pierce or pinch.   G




Images (6)
  • IMG_0531
  • IMG_0532
  • IMG_0533
  • IMG_0534
  • IMG_0535
  • IMG_0536
Last edited by GGG
OGR Publishing, Inc., 1310 Eastside Centre Ct, Suite 6, Mountain Home, AR 72653