Skip to main content

Reply to "PS3 upgrade information."

Here is a DASH-9 Upgrade.  I thought some one stated this did not fit because of body width.  It is very tight and I had to do some precision measurements before attaching the bracket.  Tolerances where about 1mm. It had to be centered along width, but also fore and aft because of the tabs on the body.  You could trim these off as an alternative.

 

Wires must run from front or rear.  Can't have wires coming up the side of the board.

 

G

Attachments

Images (2)
  • IMG_0548
  • IMG_0549
OGR Publishing, Inc., 1310 Eastside Centre Ct, Suite 6, Mountain Home, AR 72653
330-757-3020

www.ogaugerr.com
×
×
×
×
×