Skip to main content

Reply to "PS3 upgrade information."

Originally Posted by RJR:

feet, GGG and Matt are giving sound advice.  GGG, as a most-knowledgeable person on the technicalities of boards, can you verify Matt's "belief" on the voltages supplied by boards?  Did 5-volt, 3-volt PS2, and PS3 boards all supply the same voltage?

I assume 6V and use the 300 ohm.  In reality it is a high (near 22VDC) peaks that are sent to be effectively about 6V via PWM.  I drive the strip LEDs off the output with no resistors and they require 12VDC.  G

OGR Publishing, Inc., 1310 Eastside Centre Ct, Suite 6, Mountain Home, AR 72653
800-980-OGRR (6477)
www.ogaugerr.com

×
×
×
×
×