Skip to main content

Reply to "PS3 with strange startup"

I have a PS3 UP ES44AC that, when it sits on my main loop of track will come up dark and silent when power is applied to the track via my Rev L TIU's Fixed Output 1.

 

However, when the same locomotive is sitting in my one and only siding, it will start immediately when track power is applied (via Fixed Output 1) without being commanded to do so from the remote.  The power to the siding is controlled by an Atlas SPST switch.  I always ensure that the SPST switch is in the on position before I apply power to the TIU, yet the ES44 starts immediately each time when sitting in the siding.

 

After it starts in the siding it does not move, so I shut it down with the remote.  I then immediately restart it, and it runs normally under DCS control.

OGR Publishing, Inc., 1310 Eastside Centre Ct, Suite 6, Mountain Home, AR 72653
800-980-OGRR (6477)
www.ogaugerr.com

×
×
×
×
×