Skip to main content

Reply to "PSX1-AC"

The PSX1-AC is also really only for command use, it won't pass low voltages.  From the TIPS section of their site.

The onboard processors derive their power from the input power to the PSX units. To prevent any unpredictable
operation the input voltage should be kept above 10 volts.

They should really have these powered by a wallwart instead of track power.  Been meaning to look into this and come up with a mod for these.  Power the device externally and be able to use it in a conventional world.

OGR Publishing, Inc., 1310 Eastside Centre Ct, Suite 6, Mountain Home, AR 72653
800-980-OGRR (6477)
www.ogaugerr.com

×
×
×
×
×