Skip to main content

Reply to "putting new wheels on"

Steam locomotive wheels have to have the crank pins on the two wheels at 90 degrees to each other rotated in the proper direction.  If this does not happen the side rods will not go on.  The Lionel wheel press uses wheel cups to do this properly.  These are the tricky wheels to install.  The diesel and electric wheels just need to be pressed on square to the axle. These are much easier to install.  

OGR Publishing, Inc., 1310 Eastside Centre Ct, Suite 6, Mountain Home, AR 72653
800-980-OGRR (6477)
www.ogaugerr.com

×
×
×
×
×