Skip to main content

Reply to "Question about MTH PS 3 and DCC operation"

I have Lionel 180W Powerhouses that power a ZW-C.  The output of the ZW powers my NCE 10amp booster and command base.  I then have the booster wired to my track, one wire to the center rail and one to the outside rails.  So I wire it no differently than any other 3R setup. I don't have a reverse loop wired up (There will be one in the finished layout.), but I don't see it as a problem at all just like it's no problem with other 3R setups.  They are only really an issue with 2R track.  I have one locomotive I put an ESU LokSound L v4 in and have been pleased with it.  Once the layout is done I'll be upgrading most of my conventional locomotives with LokSound v5 decoders, and hopefully be able to speed match them to my MTH locomotives.  I haven't done any CV programming yet, still trying to wrap my head around it.

OGR Publishing, Inc., 1310 Eastside Centre Ct, Suite 6, Mountain Home, AR 72653
800-980-OGRR (6477)
www.ogaugerr.com

×
×
×
×
×