Skip to main content

Reply to "Question about PS3 Boards"

While MTH moved to the Fet boiler board original Premier used the Relay.  I would still replace with appropriate board because the plastic brackets that retain it are different.  Sure you could zip tie it, but....  Once a relay board is no longer available you can use the FET board.

You are going to have to match Emi non emi FET and Tender boards, and hopefully MTH has this Baked in when they program boards.  Early stuff was non emi and there is a motor function issue unless upgraded software used. This is for PS-3 Steam, not diesel or PS-32 thought the lastest are EMI compatable.

You really need to do the trouble shooting I discussed.  I routinely have gotten packages from overseas.  Shipping is more expensive and takes some time, but a small package of boards should not break the bank.  BUT you issues have shown up be for on early PS-3 and drawbar, and wiring were culprits.  G

Last edited by GGG

OGR Publishing, Inc., 1310 Eastside Centre Ct, Suite 6, Mountain Home, AR 72653
800-980-OGRR (6477)
www.ogaugerr.com

×
×
×
×
×