Skip to main content

Reply to "Question for the TMCC Gurus..."

TMCC samples the 455khz for a couple of seconds during power-on, if it sees the carrier, it assumes command mode.  If it doesn't see the signal, it assumes conventional. 

 

The issue here I suspect is that sensing is most likely all done in the R2LC processor and not by discrete circuitry.

OGR Publishing, Inc., 1310 Eastside Centre Ct, Suite 6, Mountain Home, AR 72653
800-980-OGRR (6477)
www.ogaugerr.com

×
×
×
×
×