Skip to main content

Reply to "Question with MTH Upgrade Kit"

Well, I can't imagine why you're taking the smoke unit out of the Climax to replace the board, that makes no sense!  The battery and board are in the tender!

You're going to run into a major issue with the upgrade kit unless you plan on doing a complete upgrade, that will be a lot of work.  What you really need is the PS32 board with the 5V connectors, that makes this job much more manageable. The upgrade kit has the white 3V connectors that are NOT compatible with the wiring harness in that Climax.

When I replaced the 5V board in one of these, I had to take the plastic carrier off the PS32 board set and also grind out some diecast in the tender shell to make room to fit the board.  I did find a speaker on Digikey that exactly fit for the existing speaker.

OGR Publishing, Inc., 1310 Eastside Centre Ct, Suite 6, Mountain Home, AR 72653
800-980-OGRR (6477)
www.ogaugerr.com

×
×
×
×
×