Skip to main content

Reply to "Questions on Lionel Type R and V transformers"

I would replace the rollers on the Z. You got through the hard part of getting into it. Also, I would check the circuit breaker out - it should have tripped in under 10 seconds. The Z-22 circuit breaker is available from a few of the traditional parts suppliers. You can also "upgrade" to a modern BUSSMANN 19115 breaker.

In addition, the classic transformers shouldn't continually be expected to deliver over 75% or so of their total rating, so about 180 Watts for your 250 Watt Z transformer. Can't hurt to get some amp meter readings to ensure your loads are not too large.

OGR Publishing, Inc., 1310 Eastside Centre Ct, Suite 6, Mountain Home, AR 72653
800-980-OGRR (6477)
www.ogaugerr.com

×
×
×
×
×