Skip to main content

Reply to "Rail King smoke unit fan"

NJCJOE posted:

John,

If you pull the impeller fan out of the chamber with needle nose pliers, you will see two tiny screws that attach the motor to the chamber. Easy to remove. For the harness just unsolder it and then re-solder it to the new motor.

I pulled it apart, Joe--thanks!! The big challenge now is learning to solder something that small. Looks like I'll have to practice before tackling this one. 

OGR Publishing, Inc., 1310 Eastside Centre Ct, Suite 6, Mountain Home, AR 72653
800-980-OGRR (6477)
www.ogaugerr.com

×
×
×
×
×