while I was thinking of trying your light bulb I realized that I’m going to have to remove the elements to do this sand if it is bad it should be warranty, (don’t want to make it too obvious I suck my nose in it). Out of Curiosity I repacked the unit primed it and like before works good with a suspicious amount of smoke at “low” I checked voltage across the element thinking at the very least that should change but no matter what intensity I was on it’d jump around between 4.3VDC and 4.7VDC occasionally it’d hit 5VDC and might drop just below 4VDC. On the plus side after cleaning the elements and the getting the 10min old factory batting out it didn’t stink.
|
|
