Well I have never seen a 3 pole KTM motor ever in a KTM model, their 5 pole or is it seven? think it's seven. I did swop out the magnets on one and replaced them with rare earth magnets. It would pull the wall of your barn, stalls out at just over two amp's. O! I also lightened the spring tenshon on the brushes. I was going to replace the bearings with ball bearings, maybe soon! These really are the basic differences between an older open frame motor, and a modern can motor, except for a skewed armature, some times! DCS! try adding a plastic drum, press fitted on the shaft, and add your tach strip, no real need for a fly wheel. If your really adventures, try playing around with the rare earth magnets, TESLA style, you'll get some interesting results. cTr...( Choose the right )
|