Skip to main content

Reply to "Re: Ross 175 Double Cross Over"

MONTEB53,

I have a hard time following Ross's (and Z-Stuffs) diagrams so I built new ones that are somewhat easier for me to follow.  Even though this is for the DZ-2500 machines and not the DZ-1000s, how the relay is hooked up is the same.  Maybe it will help.

RCS Double Crossover Wiring

You may only need the diamond powered for your trains to cross.  I power my diamond from a wire from the center rail.  If the engine still stalls after the diamond is powered, you need rails '1' and rails '2' powered.  To ensure you have correct polarity when the train crosses the diamond, you will need to use a relay to alternate power between rails '1' and rails '2'.  The DZ-1008A is a bit expensive but works with the DZ switch machine.

Attachments

Images (1)
  • RCS Double Crossover Wiring

OGR Publishing, Inc., 1310 Eastside Centre Ct, Suite 6, Mountain Home, AR 72653
800-980-OGRR (6477)
www.ogaugerr.com

×
×
×
×
×