Finally trying to finish up the wiring on the Ross Double Crossover, have all switch machines working properly. Have not properly wired the 1008 relay because still losing power on the diamond when set in crossover, works fine in default. The double crossover came pre-wired so only have to wire one side of the diamond. Currently have the pre-wired section on the left side, and wired the right side with white wire going to the #2 rail and the gray to the #1 rail. (Not sure if it matters of the pre-wired section is on the right or left side of the diamond, maybe it is installed upside down). The 1008 is next to the lower left hand switch, and the rail power is connected to the lower right hand side of the switch. Steve Ross confirmed the location of the 1008 relay and track power, did not think to ask him about the pre-wired side of the diamond. Not an electrician and not confident things are wired correctly. Please let me know what I am missing, the only other thing I thought of is the possibility of a bad solder connection underneath. Thanks for all your help and knowledge.
|
|
