Skip to main content

Reply to "Re-wiring Layout"

Arnold

The reward for your sharing good advice to hobbyists for years is ... receiving good information from hobbyists when you need help. You got plenty of help!

I had already applied many of the tips to my L-shaped layout:
* MTH terminal blocks for track power via bus wiring and feeders - from a Lionel 135w brick or a MTH Z1000 (the 18v output),
   selected by a knife switch
* Barrier Terminal Strips with 14v to action accessories and switches - from a separate MTH Z100 (the 14v output)
* Color coding
* Plastic cable clips for support of under-the-platform wiring  (no holes through lumber), avoids the "spaghetti effect"
* Spade lugs for wire connections to terminal strips and ring lugs at connections to #90 control buttons for accessories
* Lighted lockons to confirm power is ON at main lines and insulated sidings (activated by a toggle switch).

Good advice is priceless. Carry on, valiantly ...

Mike Mottler    LCCA 12394

OGR Publishing, Inc., 1310 Eastside Centre Ct, Suite 6, Mountain Home, AR 72653
800-980-OGRR (6477)
www.ogaugerr.com

×
×
×
×
×