@Arnold D. Cribari posted:Yes, the MTH TB red post for the outer loop is getting power from the right Z4000 throttle (A terminal) with DCS, and the MTH TB red post for the inner loop is getting power from the left Z4000 throttle (D terminal) with DCS.
The black post for each MTH TB has a wire that is connected to a nearby terminal strip for the ground bus wire.
What do you think of this?
I'm confused as to why you're using a ground bus wire and terminal strips for this setup.
Wouldn't it be easier to just run a black wire from the black posts on the rear of your Z-4K (possibly the B and C terminals) to the respective black posts on each of your MTB's and then just run a paired, stranded wire from each post on the MTB to each power drop or whatever you're powering ?
