GRJ, do the outputs of your FET (or relay output for that matter) receivers have provisioning to install a resistor for LED lighting? And/or, stated differently, for this specific case of powering, say, a pair of directional LEDs, where does the low voltage DC come from (e.g., 5V DC) and how is current limited to the LEDs? If you've already posted schematics in a previous thread and I've already made my comments on this, I apologize in advance for repeating myself.
Brian, what am I looking at? In YOUR photo on the right it appears there are seven (7) incandescent bulbs in sockets. In YOUR photo on the left it appears there are seven (7) LEDs+resistor. Is this the difference between PS2 and PS3?
Separately, in photo on left, there are two connectors circled in Orange and Purple.
The Orange connector appears to have 2 wires going to it, Orange+Purple.
The Purple connector appears to have 3 wires going to it, Purple+Green+Green.
My vision ain't so good but that's what it looks like - is this correct and what plugs into these connectors???
