Skip to main content

Reply to "Relays for Track Power using AIU"

Do you have the capacitor soldered at each end of the resistor ? Or are they connected in a series ( one after another)? I just looked at the FRM01 and the two chip numbers are identical. Do you connect outputs into one common wire going to the FRM01?

For fun, I took the lead to the CH1 and touched it to different points in the diode-capacitor/resistor setup and found that no power was getting beyond the capacitor/resistor pair.

strange.

OGR Publishing, Inc., 1310 Eastside Centre Ct, Suite 6, Mountain Home, AR 72653
800-980-OGRR (6477)
www.ogaugerr.com

×
×
×
×
×