Skip to main content

Reply to "Removing shell of a VL GS-4"

I agree the motor angle is a little flat... BUT the easiest way to fix it, is you can pull up on the back of the motor to bend the mounting bracket to align the drive back up. Don't be afraid of it. It may take some force. I do this all the time.

I put foam under my board to push it up off the drive shaft. That heat shrink rubbing on the shaft is covering the Bluetooth receiver.

The lower frame and how the electronics in the GS locos are arrange are nearly identical. I had a GS-4 apart a few weeks after I posted my GS-1. I saw little difference of installation and layout.

OGR Publishing, Inc., 1310 Eastside Centre Ct, Suite 6, Mountain Home, AR 72653
800-980-OGRR (6477)
www.ogaugerr.com

×
×
×
×
×