Skip to main content

Reply to "Repairs to Lionel ZWC transformer"

@lionelflyer,

Yes! I suspect those brackets are pretty much like taillights. Replace them both and be done with it. I will tell you that the top two exisiting screws to mount the potentiometers to the metal brackets are not properly threaded for the mounting plate. They weren't for the Lionel plates that I got either.

I confess that I just used a bigger screwdriver and they rethreaded themselves sufficiently for my standards....just be aware of what you might encounter. Also save the little plastic rectangular shims that you will see under the potentiometers...you may need them still to prevent wobble even after installing the metal replacement bracket. I did on one ZW C ...but not the other... go figure.

John

OGR Publishing, Inc., 1310 Eastside Centre Ct, Suite 6, Mountain Home, AR 72653
800-980-OGRR (6477)
www.ogaugerr.com

×
×
×
×
×