Skip to main content

Reply to "Replacement 3D Printed Smoke Funnel for the mid-2000's Lionmaster Challenger"

I can tell you the Lionmaster BB will have a totally different design than the VL-BB or even the scale Legacy BB.

Yes I think that's a given grj. The scale and VL versions seem to smoke really well (I have the VL); but typically the LM versions are tight for interior space and use that pitiful cast 2 piece funnel, which is what my improvement efforts are aimed at. So far I have workable 3D printed versions for the LM Challenger (as per above) and the LM Cabforward #4276 just done recently.

I recall several folks have complained in the past about lousy smoke with the LM-BB, so that's why I am interested in seeing what can be done to help it, while I'm on a roll. Trouble is I don't have one on my roster, so I am floundering in the dark a bit. It looks like Lionelzwl2012 may have some very helpful info though. All good!

Rod

OGR Publishing, Inc., 1310 Eastside Centre Ct, Suite 6, Mountain Home, AR 72653
800-980-OGRR (6477)
www.ogaugerr.com

×
×
×
×
×