Skip to main content

Reply to "Replacing the contact assembly, using the old Lionel badge and a modification of the contact assembly"

Got a couple of those pliers for removing the snap rings in manual transmissions.  Did quite a lot of that 'back in the day.'  If you really need to make a lionel type tool for the pickup plate it shouldn't be too hard.  Just bend a piece of strap iron to fit and drill and tap a small bolt to spread on one side.lionel-motor-spreader-repair-tool_1_beb982d4874fafda27fd461729b9a7d2

Attachments

Images (1)
  • lionel-motor-spreader-repair-tool_1_beb982d4874fafda27fd461729b9a7d2

OGR Publishing, Inc., 1310 Eastside Centre Ct, Suite 6, Mountain Home, AR 72653
800-980-OGRR (6477)
www.ogaugerr.com

×
×
×
×
×