Skip to main content

Reply to "Resistor replacement for Lionel 610-8057-200 Smoke Unit"

I have used 18 ohm in the 8057-200 successfully, running command. Smokes really well. I have also tried mth's 16 ohm resistor, but it is a bit much. Ideally you want about 10-12 watts to make good smoke IMO. This translates to about 0.6 amps additional load when the smoke unit is switched on. 

Rod

OGR Publishing, Inc., 1310 Eastside Centre Ct, Suite 6, Mountain Home, AR 72653
800-980-OGRR (6477)
www.ogaugerr.com

×
×
×
×
×