Skip to main content

Reply to "Restoring a Lionel PRR Prewar Steam Switcher & All Things Related to Keeping Them Running! Spring 2024"

David Johnston posted:

Hi Tom. Good to hear of your progress with the 227. Great little loco...

The wiring should go from the collector rollers to brush plate on the contact opposite the switch that turns the e unit on and off. There should also be a wire directly from the motor field to this point. 

Hi David,

  Thanks very much. I will need to re-check the wiring. So, for the upper tab on the motor on the engineer's side, there should be 2 wires soldered on there? I think I only had one...for the collector rollers. Where does the second wire go to, from that same tab to where? 

Thanks again, Tom

OGR Publishing, Inc., 1310 Eastside Centre Ct, Suite 6, Mountain Home, AR 72653
800-980-OGRR (6477)
www.ogaugerr.com

×
×
×
×
×